User guide

Installing and Powering Up
Name Description Value
SCS Port SCS port number 0
SCS IP SCS IP address 0.0.0.0
external EIS flag
Sets internal/external EIS 0/1.
0 indicates disable.
1 indicates enable. This sets the network that
the EIS communicates on. Internal means ‘use
the Control network’. External means ‘use the
CA network’
0
2.11.2.2 ECMGs Table
Figure 2.9 shows the Editing ECMG page.
Figure 2.9 Editing ECMGs
2.11.2.3 Reported Faults
Table 2.18 describes the reported faults associated with the Ethernet CA 1 and 2
Inputs.
Table 2.18 Ethernet CA 1 and 2 Reported Faults
Fault Fault Description
CA-Status Simulcrypt ECMG connection down: IP X.X.X.X.
Super CASID X
CA-Status Simulcrypt EMMG/PDG connection down: IP
X.X.X.X. Super ClientID X
2/1553-FGC 101 1014 Uen B
2-26