User guide

Hardware Options and Software Licenses
Figure 3.7 MX8400/HWO/PROFEC Option Module Drop-down Dialog Boxes
Ports
There are a number of ports associated with the MX8400 ProMPEG FEC Card.
These are listed on the Ports Page. Each port requires configuring to enable it to
function. Each port requires multicast IP port settings in order to operate correctly.
3.3.3.3 MX8400/HWO/PROFEC Option Module Transport Stream Settings
Figure 3.8 shows the nCompass Control Properties Page for the
MX8400/HWO/PROFEC Option Module.
2/1553-FGC 101 1014 Uen B
3-14