Network Router User Manual

Configuration and Management
The WUI is available in four languages; English, German, Spanish and
French. Click on corresponding country flag to change to the preferred
language.
The preconfigured login “User name” and “Password” is both user. You are
recommended to change the password, see section
2.2.1 – Change
Default Password.
Type
user in both the “User name” and “Password” fields and click the
Log In button. After a successful login, the Overview page is displayed,
– Overview. see section 2.2
2.1.1 Inactivity Timeout
The WUI has an inactivity timeout set to 15 minutes. Before this timeout
expires, it is preceded by a notification (displayed on top of the current
displayed page) one minute before the automatic logout:
Figure 4 - Inactivity Timeout Warning
Click Cancel to abort the automatic logout.
When the timeout expires, the User login page is displayed with a
notification about the automatic logout:
Figure 5 - User login page (after inactivity timeout)
Enter the “User name” and “Password” and click Log In to make a new
login.
1/1551-CRH 102 167 Uen Rev D 2007-11-16
9