Network Router User Manual

Configuration and Management
2.9.5 Factory Reset
The Ericsson W21 configuration can be reset to its factory default settings
from the System page.
Note: If the WUI is not accessible, a reset to factory default settings can
also be done using the Reset button on the unit. See section
4.2 –
Reset the Ericsson W21 to Factory Default Settings.
To reset the configuration to factory default settings, click Reset in the
“FACTORY RESET” section on the System page.
Note: This procedure resets ALL configurable values back to default
settings, including the Ericsson W21 login “User name” and
“Password”.
Before the reset starts, you will get the following question:
Click OK to start the reset or Cancel to abort the reset and return to the
System page.
When a reset has been performed, the following confirmation window is
displayed:
Figure 41 - Factory Reset Confirmation
Click OK to return to the System page.
56 1/1551-CRH 102 167 Uen Rev D 2007-11-16