Ericsson W25 Fixed Wir eless T erminal for WCDMA/HSDP A Wireless Terminal WCDMA/HSDPA Mobile Networks Quick Installation Guide
No part of this document may be reproduced in any form without permission from the copyright owner owner.. The contents of this document are subject to revision without notice due to continued ess in methodology pr ogr methodology,, progr ogress design, and manufacturing. Ericsson shall have no liability for any error or damage of any kind resulting from the use of this document. © Ericsson Enterprise AB 2006 All rights reserved. XX/LZT 108 9132 R2 Table of Contents INTRODUCTION ........................
INTRODUCTION This Quick Installation Guide provides instructions on how to install and get started with your Ericsson W25 Fixed Wireless Terminal. For further information about the product, advanced configuration, and troubleshooting, see the User’s Guide included on the enclosed CD. For information about connection of services, please contact your service provider. NOTE! Carefully read the document containing safety and regulatory information included on the enclosed CD.
INST ALLA TION INSTALLA ALLATION The installation procedure is divided into three steps: 1. Preparation of the Ericsson W25, where necessary physical connections are made. 2. Basic configuration, where the mobile network and wireless LAN connections are configured. 3. Identification of a suitable location and wall mounting the unit. Be sure to follow these steps as described on the following pages to successfully install the Ericsson W25. 1 - UNIT PREP ARA TION PREPARA ARATION 1 .
3. Connect power Connect the cable from the enclosed power supply adapter to the 10-28 VDC power input on the Ericsson W25. Connect the power cord to the power supply adapter and then insert the plug into a mains outlet. 4 . Connect a PC 1-4 Attach the enclosed Ethernet cable to one of the LAN (1-4 1-4) connectors on the Ericsson W25 and connect the other end to the Ethernet connector on a PC. This connector is most likely marked with this symbol: 5 .
2 - BASIC CONFIGURA TION CONFIGURATION The SIM card contains information about the subscription and is normally protected by a PIN (Personal Identification Number) and a PUK (Personal Unblock Key) code. The PIN code can either be entered from a connected phone (see step 1 below) or from the web pages (see step 2 on the next page) . NOTE! Emergency calls (i.e. 112 or 911) are always possible to make, even without a SIM card or correct PIN code. 1 .
2 . Access the Ericsson W25 web pages Start a web browser on the PC connected to your Ericsson W25, type http://192.168.1.1 in the address field, and press the Enter key. The “User login” page is displayed: NOTE! If this page does not appear, verify that the TCP/IP settings in the PC are set to “Obtain an IP address automatically”. Type user in both the “User name” and “Password” text fields and click the Log In button. The “Overview” page is displayed: 2 .
Only enter the Internet authentication details (PIN, APN, and/or PPP details) you have received from your service provider, and leave other text fields empty. There are important security issues involved when using a wireless LAN. Please read the information in the User’s Guide. 3 . Mobile network search Once you have finished the Configuration Wizard, the Ericsson W25 automatically starts searching for a network. This is indicated by the flashing Mobile Network indicator.
Wall mounting The Ericsson W25 is mounted to the wall using two screws and the two mounting slots on the unit. Insert and secure two screws in the wall at a distance of 110 mm. Leave a space of approximately 3 mm between the surface and the bottom of the screw heads. Slip the Ericsson W25 slots over the screw heads and pull down until the unit is seated securely.
HARDWARE DESCRIPTION CONNECTORS The connectors on the Ericsson W25 are positioned as shown in the illustration below. A description of each connector is provided in the table below (from left to right): Label Description 10-28 VDC Power input for connecting the included power supply adapter. Reset Reset button used to restore the Ericsson W25 to its factory default settings.
INDICA TORS INDICATORS The front panel of the Ericsson W25 has six (6) status indicators. A general description of each indicator is provided in the table below (from top to bottom): Te x t S t a t u s Description Power Green Red Unlit Mains powered. Battery powered (optional). Power is off. Mobile Network Green Red Flashing Unlit Connection to a UMTS network. Connection to a GSM network. Searching for a connection. No connection to the mobile network.
© Ericsson Enterprise AB 2006 XX/LZT 108 9132 R2
