Installation manual

630077_5 Outer Skin Kit Installation Manual.doc

10.7 Fixing the Flue to the Cavity

A length of angle should be attached to the inside of the

timber frame cavity to hold the flue in place. Once you

have fixed the angle to the inside of the cavity holes

must be drilled to secure it to the flue. Screws or rivets

can be inserted directly into the 150mm flue to hold it in

place.

To make sure the flue is installed at the correct height, a

piece of timber can be cut to 600mm and between the

fire base level and the bottom of the flue. This will

ensure the correct height for installation and support the

flue assembly.

Timber prop. as temporary support until fireplace is

installed.