Installation manual

630077_5 Outer Skin Kit Installation Manual.doc
22
14.0 Gas Fireplace Installation:
Attached to the base of the Outer Skin Kit
are guide rails. The inside edge of these
rails will line up with the outside edge of
the two outer under base supports. When
the parts are lined up, push the fire
towards the back of the Outer Skin Kit until
it cannot be pushed back any further. The
front of the firebox should now be sitting
flush with the OSK.
15.0 Attaching the Flue to the Fireplace NZ ONLY:
Once the Gas fireplace has been inserted
into the OSK, the flue can be attached. To
do this line up the 100mm flue with the flue
outlet spigot then slide the clamping flue
sleeve down onto the spigot. (NZ ONLY)
Note: To increase access through the fire
to reach the flue connection, remove
firebox and lid.