Installation manual

630077_5 Outer Skin Kit Installation Manual.doc

9.0 Installing the Flue System NZ ONLY:

Non-Masonry Timber Frame Cavity:

The heater must be flued to the outside via a 100mm diameter stainless steel flue that is

covered by a 150mm diameter liner. This must be installed in accordance with the

requirements of AS5601 / NZ5261.

The minimum flue length = 3.6m vertical height

It is important to check that you have all the necessary flue parts before beginning your

installation.

We recommend that a standard timber flue installation should include the following

components:

2 x 150 x

1200mm

Galv Flue Liner

3 x 100 x

1200mm Flue

1 x 150 x

1040mm

Galv Flue Liner

1 x 100mm Clamping

Flue Sleeve

2 x Flue Liner

Spacer Bracket

1 x Flue Cowl

3 x Spider

Bracket

1 x 180mm Flue

Sleeve

Angle 50x50x900 Flue

Bracing

1 x Flue Liner

Joiner