User Manual

Introduction
• Congratulations
• IMPORTANT WARNING
• Quick Reference Guide 4-5
Controls and Features 6-11
• Power 6
• Power-on indication 6
• Volume Adjust 6
• Mute 7
• Auto / Highway / Auto NoX 7
• Display Brightness 8
• Dark Mode 9
• Audible Alerts 9
• Signal Strength Meter
9
• ExpertMeter
10-11
• SpecDisplay
11
Preferences 12-15
• How to use Preferences 12
• Example of Preferences
12
• Overview of Preferences
13
• Details of Preferences
14-15
Technical Details 16-23
• Specifications 16
• Interpreting Alerts
17-18
• How Radar Works 19
• How POP Works 19
• How Laser Works 20
• How TSR Works
21
• How Safety Radar Works 22-23
Service 24-26
• Troubleshooting 24
• Service 26
• Warranty 26
• Accessories 29
* Factory Default Settings
Press the REVIEW button
to go from one category
to the next
PILOT LIGHT
(Power-on indication)
POWER-ON SEQUENCE
SIGNAL STRENGTH METER
AUTOMUTE
VOICE
BANDS
Pilot HWY
Pilot H
Pilot H.>
Pilot V
PwrOn FST
PwrOn STD
Meter STD
Meter EXP
Meter SPC
aMute ON
aMute OFF
Voice ON
Voice OFF
Bands DFT
Bands MOD
X ON or OFF (default is on)
Ku ON or OFF (default is off)
K ON or OFF (default is on)
Ka ON or OFF (default is on)
POP ON or OFF (default is off)
SWS ON or OFF (default is off)
LSR ON or OFF (default is on)
TSR ON or OFF (default is off)
Press the CHANGE button
to change your setting
within a category
* Full word: Highway or Auto or Auto NoX
Letter: H or A or ANX
Letter, with scanning dot
Vehicle voltage
* Fast power-on sequence
Standard power-on sequence
* Standard signal strength meter
Expert Meter
SpecDisplay
* AutoMute on
AutoMute off
* Voice alerts on
Voice alerts off
* Factory default settings
One or more bands have been changed
Turn bands “ON” or “OFF” by
pressing the V•MUTE button
Quick Reference Card
 Remove card along perforations 
 Remove card along perforations 
2
PASSPORT Qi45 Quick Reference Card
Table of Contents
3