User guide

17 SYSTEM SPEED DIAL

Up to 100 System Speed Dial numbers and associated

names can be stored (in location numbers 600 to 699) for

access by any station. A user can initiate a speed dial by

a “Rolodex” type selection on the display or by dialing the

location number (600 to 699).

Enter the 3 digit location number to program, a ten char-

acter name, and the number to be dialed (including the

line group 9, 8, or 7) .

The number can be up to 30 digits long including the

additional characters: #, *, or 2 second pauses. These are

inserted by pressing the PARK 3 Key to select the desired

character: # , * , or a 2 second pause. Press # to confirm

the inserted character and continue. Press ## to complete

the entry.

Example: to create a System Speed Dial number that dials

9, 578-5644, pauses for 4 seconds, and dials #104 input:

95785644, (Tab to) 2 SEC DELAY, #, (Tab to) 2 SEC

DELAY, #, (Tab to) # , 104 ##.

Press the HOLD Key to delete any character or digit

entered in error. To delete an entire speed dial number

and name, delete the location number by pressing the

HOLD Key.

Note: System Speed Dial will be available to all stations

regardless of the station’s line access or toll restriction.

IVX

2.8 A

DMINISTRATOR

PROGRAMMING