User guide

These mailboxes are created or deleted here, but are turned
“on” only when a personal greeting (the information to be
played) has been recorded. Deleting the personal greeting
will turn “off” the mailbox.
The sequence of programming is as follows:
1. 2. 3. 4. 5.
Each programming step is defined as follows:
1. M
AILBOX NUMBER
Input a mailbox number 300 to 499.
2. NAME
The mailbox name is used for the LCD Display, reports,
and as a programming aid. The name length can be up to
10 characters (See Inputting Alphabetic/Numeric
Characters earlier in this section). Default = the Mailbox
Number.
3. TYPE
Select a mailbox type by pressing the PARK 3 Key: Guest or
Info
4. & 5. CALL FORWARD (INFO MAILBOX ONLY)
An Info Mailbox can be set to call forward (after the per-
sonal greeting has played) to an Extension, Department, a
Mailbox or a Branch ID for Day Mode and differently for
Night Mode. See the Installer for details for this feature.
Default = 9999 (automatic disconnect)
MB NAME TYPE CF DAY CF NIGHT
300 DANA GUEST
302 LITERATURE INFO 114 9999
IVX
2.12 A
DMINISTRATOR
PROGRAMMING