User guide

56 CASCADE P
AGING MAILBOXES
Up to 10 Cascade Paging Mailboxes (in range 520 to 529)
can be created. These can be assigned to anyone that
requires additional levels of paging beyond the single
level available in all user mailboxes. The paging numbers
and number of times each is to be paged before the next
paging number is added are programmed in this function.
Up to three paging numbers of up to 24 digits each can be
programmed by the user to be paged whenever a new
message is taken in the mailbox. The system will page the
first paging number (for the number of times listed) and
then add the second paging number (for the number of
times listed) and then add the third paging number and
will continue to page all three pagers until the message
has been retrieved. The period of minutes between pages
is programmed by the Installer.
6 RECORDING
61 RE-RECORD SYSTEM PROMPTS
The following system prompts are to be played to an out-
side caller at different points in the call routing or mailbox
functions. These system prompts have been pre-recorded
at the factory but may be re-recorded if preferred in a dif-
ferent voice or with different instructions. The Auto
Attendant branch prompts (such as the Main Greeting or
sub-menus) are also recorded here by inputting the Branch
ID number as the prompt number.
Practice the prompt by recording and re-recording – start-
ing and stopping with the 1 key. When satisfied with its
quality, press the # key to confirm. Deleting a re-record-
ing by pressing the HOLD Key will return to the default
recording if a system prompt or create a “blank” space if a
Branch ID.
IVX
2.14 A
DMINISTRATOR
PROGRAMMING