Owner's Manual

Thank you for purchasing ESPERIA product.
Please read this owner’s manual carefully before operang this unit.
Store it in safe place with this manual.
Memorizing radio staon to the memory
1. Press the [BAND] buon to select FM1, FM2, FM3, and MW , and select the desired
staon.
2. Then search the desired station by the seek or the manual tuning.
3. Press any button (from ① to ⑥) for 3 seconds or longer.
・The preset channel number will be indicated on the display.
・ON each band ( FM1, FM2, FM3, and MW ), 1station can be put on the memory on each of the
button from ① to ⑥.
Auto Store Memory (SCAN)
During the radio mode, by pressing and releasing [SCAN] Button will automatically store a strong signal station
in memory from the channel 1 to the channel 6.
NOTE :
By this operation, the current data in the memory will be erased.
When the expected radio station is not be able to store in the memory by the SCAN function, Please store the
radio station in the memory manually.
Owner’s manual
KRH-M202
12/24V Bluetooth®/USB/MP3/WMA
AM/FM Stereo Radio
24V/12V
MP3/WMA
Operaonal Panel
② LCD (Liquid Crystal Display)
The receiving band and frequency or the current me will be indicated on the display.
④ Scan [SCAN] Buon
By pressing and releasing the buon the scan tuning will start automacally and the strong signal
are memorized on memory.
③ Clock (CLOCK ADJ.) [CLOCK, CLOCK ADJ. ] Buon
On the Radio Mode, pressing this buon will indicate the current me and pressing it again will
resume frequency display.
Aer 3 seconds, the me display will automacally change to the frequency display.
Press and hold to enter in Clock Adjustment Mode.
⑤ Tuning Buons [TUNE∧,∨]
By pressing [TUNE∧] or [TUNE∨] buon the receiving frequency will be up or down.
By pressing the buon more than 2 second, the seek tuning will start.
When the strong signal staon is received the seek will stop.
Please press the buon again if you want to stop the seek tuning.
① Power Buon
Press the Buon to power ON. Press again to power OFF.
⑥ Preset Memory Buon[①～⑥]
On each band (FM1,FM2,FM3 and MW), One staon is memorized on the memory from the channel
1 to the channel 6.
Refer to the secon “Memorizing radio staon to the memory”
⑦ Bands Select Buon [BAND]
By pressing the buon, the receiving band will be selected as shown.
FM1→FM2→FM3→MW
The receiving band and frequency will be indicated on the display.
⑧ Volume Control Buon [VOL＋,－]
By pressing the [VOL+] buon, the sound volume will increase.
By pressing the [VOL–] buon, the sound volume will decrease.
⑫ AUX-IN jack（Auxiliary Audio In Put）
Open the rubber cap and connect the portable audio device by the cable the stereo mini plug(3.5mm)
Please cover the AUX-IN jack with the rubber cap dustproof or waterproof, when you do not need to con-
nect the portable audio device.
Seng the Clock
When you hold down the [CLOCK] (CLOCK ADJ.) Buon for 2 seconds or more, the clock display
ashes and the clock adjustment mode is entered.
In clock adjustment mode
Pressing the [TUNE H] button to adjust hour.
Pressing the [TUNE M] button to adjust minute.
The clock display will return by pressing the [CLOCK] (CLOCK ADJ.) Buon again.
⑬ USB Input Terminal
Open the rubber cap and connect a USB storage device.
Please cover the USB input terminal with the rubber cap for dustproof or water proof, when you
do not need to connect the USB storage device.
Listening the radio
1. Set the ignion key to ACC or ON and press the [POWER] buon to turn on the radio.
2. Select the desired band FM or MW by the [BAND] Button.
3. Select the desired station by a [① to ⑥] button or a [TUNE] Button.
4. To turn o the radio, press the [POWER] buon.
Manual tuning
SEEK tuning
Press the [TUNE∧] or [TUNE∨] Button, the received frequency shifts one step.
Pressing the [TUNE] Button for 2 second or longer, the seek tuning will be start and stop at the available
frequency.
Specicaons
General
Power Source ：DC12V～24V
Power Consumpon ：Less than 2A
Rated Output Power ：16W + 16W(4Ω)
Normal Output Power：14W + 14W（10％TDH，4Ω)
Dimension ：179(w)×50(H)×91(D)mm
FM secon
Receiving Frequency Range： 87.5～108.0MHz(EU)
87.9～108.0MHz(USA)
Usable Sensivity ： 3µV(S/N 30dB)
S/N Rao ： 50dB
MW secon
Receiving Frequency Range： 531～1602kHz(EU)
530～1710kHz(USA)
Usable Sensivity ：20µV(S/N 20dB)
AUX secon
AUX IN ：Stereo mini jack(φ3.5)，
Rated Input Power :1V
Normal Input Power :90mV
Bluetooth
Specicaon ：Ver5.0
Bluetooth Class：Class2
(Maximum Distance
10m) Frequency Range：2.402GHz～2.48GHz
Prole ：HFP V1.5,A2DP V1.2,AVRCP V1.0
USB
Specicaons：USB2.0/1.0
Support Format
・MP3：MPEG1,2,2.5
Audio Layer 2,3
・WMA：Windows Media
TM
Audio
Support File System
：FAT16/FAT32 File system
Maximum Output :DC5V / 0.5A
FM Mode
※Preset the frequency
by each 6ch.
Preset Memory Channel
It is displayed while receiving in stereo.
■General
USB ：USB Mode
BT ：Bluetooth Mode
AUX ：AUX Mode
※For USB Mode or Bluetooth Mode only
Volume Level
Audio Operaon
■Radio mode
Radio funcon
FM1
FM2
FM3
MW ：AM mode
Stereo
Frequency / Clock
Funcon
USB Operaons
Connect a USB storage device to USB socket on the this unit.
Press the [MODE] Button and select the USB Playback Mode.
During the USB Playback Mode. “USB”will be indicated on the display.
During playback, follow the instruction below to control playback.
NOTE : ・Please connect/uncomment the USB storage device in a other than USB mode.
・ESPERIA does not guarantee compatibility with all USB storage device
・Be sure to use the extension cable for the USB socket.
・Please do not connect other than USB memory device. Can not charge the smartphone.
・ESPERIA cannot be liable for any data loss or damage and improper access of USB storage
device.
① Previous Track[ ] Button
Skip to the previous track. Press and hold this button to rewind fast-rewind.
② Play/Pause[ ] Buon
Pause or resume playback.
③ Stop [ ] Button
Stop playback.
Press the Play Button, playback starts at the top of current track
④ Next Track[ ] Button
Skip to the next track. Press and hold this button to rewind fast-forward.
⑤ Repeat [ ] Button
Repeat the current track and Press the Repeat Button again, turn off the
Repeat Mode.
⑩ Bluetooth LED
When this LED lights up, the Bluetooth device is connected. Flashes in pairing standby mode.
⑨ Bluetooth [B] buon
Press the buon to connect to the last Bluetooth compable device that has registered (Pairing).
If you press and hold for 2 seconds or more, connecon (registraon) is released and the pairing
standby mode is set.
⑪ Mode Select Buon [MODE]
Pressing the buon, a source will be selected as shown.
If USB memory is not connected, USB mode will skip aer any seconds.
FM or MW → USB → Bluetooth → AUX
USB AUXIN
-2.32dBm(for EU)