Treadmill - Cardio Equipment User Manual

ET488/ET588
11
STEP 7
• Connect the wire from the fan assembly into the mating connector on the back of the
console. Secure the fan assembly to the console with three M3 x 18mm screws (135).
Do not attempt to move the unit unless it is in the folded and locked position. Be sure the power
cord is secured to avoid possible damage. Use both handrails to maneuver the unit to the desired
position.
 To Fold The Treadmill:
Make certain the treadmill is at minimum incline. Lift the treadmill running deck until it is
secured by the locking telescoping tube assembly in center back of base.
 To Unfold The Treadmill:
Apply slight forward pressure on the treadmill running deck with one hand. Pull down on the
yellow unlocking lever and slowly lower the running deck to the floor. The deck will lower
unassisted when it reaches about waist high.
 The treadmill is equipped with four transport wheels that are engaged when the treadmill
is folded. After folding simply roll the treadmill away.
Folding Instructions
Transport