Installation guide

8. Rotate outer door

Flip door over so handle side is down.

Remove screws at top, bottom, and side of door (4 screws).

Keep door screws separate from hinge screws as they are

different sizes.

Holding door over towel on dryer, pry inner door and lift to

separate it from outer door.

NOTE: Do not pull on door seal or plastic door catches.

Take outer door and rotate it 180° and set it back down on

inner door. Be certain to keep cardboard spacer centered

between doors. Reattach outer door panel to inner door

panel so handle is on the side where hinges were just

removed. Insert 4 door screws.

9, Attach door hinges

Reattach door hinges to dryer door so that the larger hole is

at the bottom of the hinge.