Installation Sheet

PRODUCT NAME:Chamber LED Pendant

ITEM NUMBER:E21226-BKGLD

Bulbs (Integrated): LED 51W

Page 1 of (2)

Please consult your electrician for hanging fixture and wiring.

MADE IN CHINA

WARNING: Wires need to be connected to driver

found in canopy and should not be connected directly

to power source or a short may occur .

rary

This fixture is designed to dim with an

Electronic Low Voltage dimmer. Dimming

levels will vary by dimmer.

Below is a List of Recommended Dimmers:

Lutron DVELV-300P

Lutron SAELV-153P

Leviton 6674-POW

Legrand RH703PTU

Due to inrush current wattage should not

exceed 150 watts of product for a 600 watt

dimmer.

PAGE 1
rary PRODUCT NAME:Chamber LED Pendant ITEM NUMBER:E21226-BKGLD Please consult your electrician for hanging fixture and wiring. This fixture is designed to dim with an Electronic Low Voltage dimmer. Dimming levels will vary by dimmer. Below is a List of Recommended Dimmers: Lutron DVELV-300P Lutron SAELV-153P Leviton 6674-POW Legrand RH703PTU Due to inrush current wattage should not exceed 150 watts of product for a 600 watt dimmer.
PAGE 2
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation (A) Mounting Bracket (B) Safety lanyard (D) Canopy (E) fixture Locate all hardware & components before discarding packaging 0UTLET BOX A A 0UTLET BOX B 1.) Step.1: Remove Mounting Bracket (A) from Canopy(C) to install to electrical box. C A 2.) B C Step.2: Connect safety lanyard(B) to Mounting Bracket(A).Wire fixture to wires in outlet box. Bare wire is for Ground.