Installation Sheet

2.)
1.)
3.)
(A)
Mounting Bracket
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation
Locate all hardware & components before discarding packaging
Cleaning & Care:
Page 2 of (2)
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner.
(B)
Safety lanyard
(E)
fixture
Step.1: Remove Mounting Bracket (A) from Canopy(C)
to install to electrical box.
Step.2:
0UTLET BOX
0UTLET BOX
Step.3: Adjust wire length to desired mounting height,
and tighten strain relief screws to secure.
(D)
Canopy
A
B
C
A
A
B
C
Connect safety lanyard(B) to Mounting Bracket(A).Wire fixture
to wires in outlet box. Bare wire is for Ground. Secure canopy(C)
to mounting bracket using screws on the sides of the canopy.