Contemporary Lighting™ PRODUCT NAME:Concentric LED Pendant ITEM NUMBER: E24049 Please consult your electrician for hanging fixture and wiring. This fixture Is designed to dim with standard trial forward phase dimmer. Dimming levels will vary by dimmer.
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation — 1 Bracket (A) Canopy(B) Stem(C) Body(D) Locate all hardware & components before discarding packaging ® Step. 1: Run wire through the stems (C) + and combine stem lengths to desired mounting height. Step. 2: Remove the mounting bracket (A) from canopy and install to electrical box. (D) 3) Step. 3: Use terminal block to connect wires. Red to red wires, black to black wires, and green wire to ground screw.
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation o 1 == Bracket (A) Canopy(B) Stem(C) Body(D) Locate all hardware & components before discarding packaging ®» — . (B)fi 1 * Step. 4: Install canopy (B) to bracket (A) n< and tighten screws at the ends of canopy to secure. Step. 5: Hold the stem and adjust the Body (D) to the preferred angle. Cleaning & Care: Clean with soft cloth and a mild detergent. Do not use abrasive cleaner.