Installation Guide

ManualsBrandsET2 ManualsChandeliersET2 Satellite 16 Light 41" Wide LED Chandelier

C o n t e m p o r a r y

L i g h t i n g

PRODUCT NAME: Satellite

ITEM NUMBER: E24286-24

Please consult your electrician for hanging fixture and wiring.

PRODUCTS ARE NOT INTENDED

FOR COMMERCIAL USE.

MADE IN CHINA

Page 1 of (4)

The fixture is designed to dim with a standard

Triac forward phase dimmer. Dimming levels

will vary by dimmer.

Below is a list of recommended dimmers:

Lutron MACL-153M

Lutron DVL-153P

Lutron SCL-153P

Leviton IPL06-10Z

Leviton 6674-POW

Due to inrush current wattage should not

exceed 150 watts of product for a 600 watt

dimmer.

Warning!Wires need to be connected to driver

found in canopy and should not be connected

directly to power source or a short may occur.

Summary of content (4 pages)

PAGE 1
Contemporary Lighting PRODUCT NAME: Satellite ITEM NUMBER: E24286-24 Please consult your electrician for hanging fixture and wiring. The fixture is designed to dim with a standard Triac forward phase dimmer. Dimming levels will vary by dimmer. Below is a list of recommended dimmers: Lutron MACL-153M Lutron DVL-153P Lutron SCL-153P Leviton IPL06-10Z Leviton 6674-POW Due to inrush current wattage should not exceed 150 watts of product for a 600 watt dimmer.
PAGE 2
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation (A) Mounting Bracket (I) Finial (J) (K) Locate all hardware & components before discarding packaging (E) 1.) (D) (C) (G) (H) (F) (B) (E) (I) (A) (D) Step.1: Run wire through stems and combine stem lengths to meet desired mounting height. (C) 1 2 (F) 2.) Step.2: (B) (K) 1 2 Using wire terminal block in the canopy, wire the low voltage red/black wire to the driver accordingly.
PAGE 3
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation (A) Mounting Bracket (I) Finial (J) (K) Locate all hardware & components before discarding packaging 4) Step.4: Wire fixture to wires in outlet box. Green wire is for Ground. Install fixture to bracket and tighten screws at the ends of the canopy to secure. (G) (H) (F) (E) (H) (I) (D) 5.) (I) Step.5: Install fixture to bracket and tighten ball nuts (I) on the canopy to secure.
PAGE 4
ITEM NUMBER: E24286-24 Acrylic Diffuser ＆ Glass K:16PCS EGLS24284-24 J:16pcs EACL24284-09 MADE IN CHINA Page 4 of (4)