User Manual

Table of Contents
Table of Contents i
Introduction . . . . . . . . . . . . . . . . . . . . . . . 1
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Sensor dimmer settings . . . . . . . . . . . . . . . . . . 5
Color rendering and quality . . . . . . . . . . . . . . 6
Contacting ETC . . . . . . . . . . . . . . . . . . . . . 7
Retrofit kit installation . . . . . . . . . . . . . . . 8
Remove incandescent lamp housing . . . . . . . 8
Install Source 4WRD retrofit . . . . . . . . . . . . . . . 9
Fixture installation . . . . . . . . . . . . . . . . . 10
Attach C-clamp and safety cable . . . . . . . . . 10
Connect cables . . . . . . . . . . . . . . . . . . . . . . . . 11
DMX pinout . . . . . . . . . . . . . . . . . . . . . . . 12
User interface . . . . . . . . . . . . . . . . . . . . . 12
Error codes . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Focus the fixture . . . . . . . . . . . . . . . . . . . 13
Set the Z-adjustment . . . . . . . . . . . . . . . . . . . 13
Adjust the yoke position . . . . . . . . . . . . . . . . 14
Change the height position. . . . . . . . . . . 14
Set the angle within the yoke . . . . . . . . . 14
Shape the beam. . . . . . . . . . . . . . . . . . . . . . . 14
Use the color frame . . . . . . . . . . . . . . . . . 14
Use a pattern . . . . . . . . . . . . . . . . . . . . . . 15