User's Manual

22 Irideon FPZ
Clean the Lens
1: Remove the integrated media holder.
2: Use a Phillips screwdriver to remove the three screws from the front of
the fixture.
3: Remove the front casting and the metal shaft.
4: Remove the light block bracket.
5: Remove the lens adjustment knobs.
6: Remove the front and rear lens holders.
7: Remove dust with a blast of oil-free air or wipe with a clean, lint-free
cloth. Isopropyl alcohol, distilled water, or a 50%-50% mixture of each
can be used to clean the glass surface.
8: Replace the lens.
WARNING:
Do not use ammonia-based or other harsh commercial
cleaners. Clean lens only as directed.
Commercially available glass cleaning agents should be
avoided as they may contain ammonia, other harsh
chemical detergents, or abrasive agents. These cleaners
may damage the lens surface. Do not immerse or soak the
lens in any cleaning solution.
Integrated
media holder
Front
casting
Metal
shaft
Light block
bracket
Front
lens
Rear
lens
Lens adjustment
knobs
Three screws