User's Manual

User Manual 3
Specifications
Physical
Steel yoke with 0.406” (10.3 mm) diameter
mounting hole
Rotating shutter assembly ±175°
E-size gobo pattern holder (included) 1-1/2”
(37.5 mm) with a 1” (25.4 mm) image area
IP20 rated
Zoom range to suit a variety of throw
distances
Captive accessory slot for pattern holder
(included)
Locking, stainless steel, full hard shutters in
a tri-plane assembly, 0.40 mm (A301 grade)
Magnetically held integrated media holder
for 2.6” (66 mm) diameter color media or
diffusion or 1.75 mm-thickness dichroic
glass
Track-mount fixture:
- Compatible and ETL-listed for DataTrack
(EUTRAC) brand track
- DataTrack color matching track adapter
included
Portable fixture:
- C-clamp (included in non-EU markets)
- Optional accessory for Unistrut
®
mounting (order separately, part number
7191K1000)
Canopy fixture:
- Can be installed directly on 4” and
4-11/16” backboxes, or on backboxes
with round cover plates
- Not for installation on 1-gang backboxes
or trim rings
Electrical
Power at full intensity: 20 W (typical),
24 W (maximum)
Input voltage options:
- Track-mount and portable: 100–240 V,
50/60 Hz
- Canopy (0–10 V and DALI): 120–277 V,
50/60 Hz
- Canopy (DMX): 100–277 V, 50/60 Hz
Portable fixture: 6 ft power cable hard-wired
to fixture with mains connector options of
NEMA 5-15P, Schuko, or UK
Inrush (first half-cycle) for 0–10 V and DALI
canopy fixtures:
- 120 V: 2 A
- 240 V: 5 A
- 277 V: 6 A
Inrush (first half-cycle) for all other fixtures:
- 120 V: 11 A
- 240 V: 24 A
- 277 V: 28 A
All variants require power from a non-
dimmable source
LEDs
Cree LED source
- Irideon FPZ 2700 K Gallery: 90+ CRI
- Irideon FPZ 3000 K: 80+ CRI
- Irideon FPZ 3000 K Gallery: 90+ CRI
- Irideon FPZ 4000 K: 80+ CRI
- Irideon FPZ 5000 K: 80+ CRI
Long-life LED: 70,000 hours L70 lumen
maintenance
Optical
Built-in zoom optics
(25–50 degree field-angle)
Beam edge continually adjustable
hard to soft
Projector-quality, high-contrast lenses
Thermal
0°C to 40°C (32°F to 104°F) ambient operating temperature