Digital Body Weight Scale Model No.: EB4410B Questions or Concerns? (855) 686-3835 • support@etekcity.
Thank You. Thank you for purchasing the EB4410B Digital Body Weight Scale by Etekcity. We are dedicated to providing our customers with quality products for building a better living. Should you have any questions or concerns about using your new product, feel free to reach out to our helpful customer support team at (855) 686-3835 or by email at support@etekcity.com.
Package Contents Table of Contents 1 x Digital Body Weight Scale 1 x User Manual 1 x Measuring Tape 4 x 1.
Safety Information IMPORTANT: Please read and comply with all of the instructions and warnings provided in this manual before using the product. Failure to comply with the instructions and warnings provided herein may result in inaccurate results and/or damage to the product itself. • • • • • • • • 4 The glass platform is slippery when wet. Make sure the platform is dry before stepping on for measurement.
Main Functions 1. Scale platform 2. Digital display 3. Unit selection 4. Battery compartment 5.
Set-Up Open the battery compartment cover located on the back of the scale. Remove the four 1.5V AAA batteries from their plastic film and apply the batteries under the correct polarity. Reseal the battery compartment in order to activate the scale.
Operation Weight Measurement 1. For best results, place the scale on a hard, flat surfaces. Avoid carpet or soft surfaces. 2. Gently step on the scale. The scale will automatically activate. 3. Remain standing evenly on the scale, without moving or shifting your feet or body. The scale will then display and flash your final results.
Converting Weight Units Body Measuring Tape 1. Your new body weight scale comes with a body measuring tape so that you can measure your waist, arms, and legs to help track your fitness progress. Apply pressure onto the weighing platform to activate the scale. 2. Press the unit conversion button on the back of the scale to convert units from pounds (lb) to kilograms (kg). 3. Place the scale back onto a hard, flat surface when you are ready to measure.
2. Wrap the measuring tape around the body part you are measuring. 3. Insert the peg into the slot on the other side of the measuring tape. 4. Press the button on the housing to shorten the measuring tape. 5. When you have finished measuring, remove the peg from the slot and press the button to fully retract the measuring tape. NOTE: • WARNING: DO NOT let children play with the measuring tape.
Maintenance Battery Replacement 1. Open the battery compartment on the back of the scale. 2. Remove the old batteries and dispose of them properly. 3. Install 4 new AAA 1.5V batteries, making sure they are placed under the correct polarity. 4. Replace the battery compartment cover. NOTE: The scale may need to be recalibrated after replacing the batteries.
Recalibrating the Scale If the scale has been moved or flipped upside down, it must be recalibrated to ensure accurate results. 1. Place the scale on a hard, flat surface. 2. Step on the scale with one foot until the display lights up, then step off. 3. The scale will show “0.0,” indicating that the calibration was successful.
Specifications 12 Weight Capacity: 440 lb (200 kg) Graduation: 0.2 lb (0.1 kg) Weight Units: lb | kg Battery: 4 x 1.5V AAA batteries Platform: Tempered Glass Auto-off: 15 seconds LCD Display: 3.9” x 1.9” (100 x 50mm) Dimensions: 12” x 14” x 0.
Troubleshooting Error Message Reason Solution “Err” Maximum weight capacity has been exceeded. Step off the scale to avoid damage. Item being weighed is too light. Remove item and use a smaller scale to measure object. “Lo” Low battery. Replace the batteries as noted in the Battery Replacement section. “C” Scale needs to be calibrated. Recalibrate the scale. Scale is not turning on. Batteries may be incorrectly installed. Take out batteries and reinstall them under the correct polarity.
Warranty Product EB4410B Digital Body Weight Scale Default Warranty Period 1 year For your own reference, we strongly recommend that you record your Order Number and date of purchase. Order Number: Date of Purchase: TERMS & POLICY Etekcity and its subsidiaries assume no liability for damage caused by the use of the product other than for its intended use or as instructed in the user manual.
Customer Support Should you encounter any issues or have any questions regarding your new product, feel free to contact our helpful Customer Support Team. Your satisfaction is ours! Customer Support Support Hours Etekcity Corporation 1202 N. Miller St. Suite A Anaheim, CA 92806 Monday - Friday: 9:00 am - 5:00 pm PST Toll-Free: (855) 686-3835 Fax: (657) 202-1693 Local: (657) 500-1872 Email: support@etekcity.com *Please have your order ID number ready before contacting customer support.
Scan here to join the community! Visit us at www.etekcity.com Building on better living.