User Manual

6
7
OPERATION
NOTE: The inflation and deflation ports
will fit directly onto larger items such as
inflatable rafts or air mattresses. Use the
appropriate-sized nozzle on smaller inflation
valves.
Inflation
1. Attach the inflation port to the item
being inflated. If necessary, connect one
of the adapters to the inflation port.
2. Plug the power cord into a powered
electrical outlet.
3. Press “I” on the power switch to turn on
the air pump. Press “0” to turn off the
pump.
Deflation
1. Attach the deflation port to the item
being deflated. If necessary, connect
one of the adapters to the deflation
port.
2. Plug the power cord into a powered
electrical outlet.
3. Press “I” on the power switch to turn
on the air pump. Press “0” to turn off
the pump.
Maintenance
• When finished using the air pump, turn
it off, then unplug it from the electrical
outlet.
• Allow the air pump to cool for at least
30 minutes before storing.
• If necessary, use a damp cloth soaked
in mild detergent to remove any tough
stains on the air pump. Dry immediately
with a clean cloth. DO NOT immerse the
air pump in water or other liquids.
• Store the air pump in a cool, dry place.
Make sure it is not placed in an area with
direct sunlight or chemical substances.
• This air pump does not contain any user
serviceable parts.