Instructions / Assembly

5 WWW.ETISSL.COM
Please contact 1-855-384-7754 for further assistance.
4
Pre-Installation (continued)
PACKAGE CONTENTS
Installation
Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with the package
contents list. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for
replacement parts.
A
Part Description Quantity
A LED Light Module 1
CC
Yoke Mounting
1
Marking the yoke position
□ Mark the position of the hole to be drilled, lining up
the mounting holes of the yoke (CC) with the drilled.
□ Drill 2 expansion screws into the 2 holes drilled by
step 1.
Yoke Mounting (continued)
3
Mounting fixture to ceiling
□ Mount the fixture to the drilled holes by step 1 with
screws (AA).
2
Attaching the yoke to the fixture
□ Attach the yoke (CC) to the fixture housing loosely,
using the flat washers (BB).
4
Making the electrical connections
□ Connect the incoming electrical wires to the set of power
wires black to black (hot), white to white (neutral) and
green to green (ground).
Hook Mounting
1
Attaching the yoke to the fixture
□ Attach the yoke mounting bracket (CC) into threaded
opening of the driver bracket.
2
Attaching hook to yoke
□ Attach the hook (DD) into threaded opening in the top of
the yoke mounting bracket (CC).
DD
AA
AA
BB
BB
CC
CC