Installation Guide

6
Downrod Mounting (continued)
3
Making the electrical connections
□ With help from another person, hold the fixture body (A) near the electrical outlet
box while connecting the electrical wires.
□ Run the power cable and dimming cable from the fixture body (A) to the electrical
outlet box, feeding the wires through the two waterproof connectors (FF).
□ Insert the waterproof connectors (FF) into the electrical outlet box.
□ Connect the hot and neutral (black and white) wires from the fixture body (A) to
the same color wires in the electrical box.
□ Connect the green wire from the fixture body (A) to the ground wire in the
electrical box.
□ If a 0-10v dimming circuit is available, connect the purple and gray wires from
the fixture body (A) to the same color wires in the electrical box.
□ If 0-10v dimming is not desired, wrap the ends of the purple and gray wires with
electrical tape to cover the wire.
□ Cover the wire connections using the wire connectors (GG).
□ Wrap the wire connectors (GG) with electrical tape for a more secure connection.
□ Tuck all electrical connections into the electrical outlet box.
4
Completing the installation
□ Cover the electrical outlet box and attach the downrod.
□ Restore power at the electrical panel.
□ Turn on the light switch to activate the fixture.
FF
GG