User Manual

EN 8
Grease filters
Removing the grease filters
1. Remove the filters one by one by pulling on their release handles.
Carbon filter
Replacing the carbon filter
The carbon filter must always be used if the cooker hood is not ducted.
2. Remove the three panels.
3. Remove the grease filters.
4. Attach the carbon filters to the filter.
5. Replace the grease filters.
Note:
Saturation of the activated charcoal will eventually occur after
prolonged use, depending on the type of cooking and how
frequently the grease filter is cleaned.
The carbon filter needs to be replaced at least every four months.
The carbon filter cannot be washed for reuse. Saturated carbon is
not environmentally friendly. Change the filter regularly.
Lighting
The cooker hood is fitted with LED lighting.
LEDs guarantee you optimum lighting, a service life of up to
10 times longer than conventional lamps and energy savings of as
much as 90%.
Contact the technical department when LED lighting needs to
be replaced.
MAINTENANCE