Operation Manual

13
Before you can use the appliance
Position
The appliance is suitable for climat
classification SN (ambient temperature
10 - 32 °C).
Place the appliance on a flat and stable
surface.
Make sure that there is sufficient ventilation,
leave a space of 10 cm around the appliance.
You can level the appliance using the
adjustable feet.
Leave the appliance to stand for at least 3
hours before you insert the plug into the
socket.
Cleaning
First, ensure that the interior is clean and dry.
For cleaning, use the suds of a neutral
cleansing agent (a general detergent or
washing-up liquid). After cleaning, rinse the
interior with clean water and rub dry.
Leave the appliance to dry for 1 or 2 hours.
Set the thermostat in the middle position.
Insert the plug into the socket. The appliance
now cools continuously until the set
temperature has been reached.
Setting the temperature
The knob is marked with a 'zero' or 'stop'
setting and with the figures 1 (least cold) to
4 (coldest).
Fast freezing
If you want to freeze large amounts of food at
the same time, you can use the fast freeze
switch.
Turn off the fast freeze switch when the food
is frozen.
Indicator lights
Red alarm light lights up if the temperature in
the freezer is too high.
This can happen:
– when the freezer is being connected up;
– when fresh products are being frozen;
– if the door has been open too long or if the
appliance is defective.
Green operational light lights on when the
freezer is switched on and operational.
Yellow operational light lights up when the
fast freeze button is switched on.
PREPARING FOR USE
88026124 HL EVV.qxp 14-03-2008 17:09 Pagina 13