Owner`s manual

ZONEGUARD OWNER’S MANUAL

LISTEN TO AM/FM

Select Band

Press the <AM/FM> button to listen to AM/FM band,

repeatedly press it to shift between AM and FM.

Tuning in Stations

1. Manual Tuning: Press the < > or < > button

repeatedly to tune into your desired

station.

2. Auto Scan Tuning: Press and hold the <

> or < >

button until frequency starts

scanning to auto tune into the next

available station. If the signal is

not strong enough, you can tune

manually to get a better reception.

Storing Stations

When listening to AM/FM band, tune into your desired

station, press the <MEMORY> button (the last button on

the left side of the unit), the LCD will display <STORE-->.

Press either of the 6 <Memory Location> buttons, located

on the front of the unit, above the speakers. You can

directly press the corresponding memory location to

retrieve the saved station.

To retrieve better reception when listening to the FM

station, adjust the length of the antenna and place near

a window. When listening to the AM station, rotate the

unit to retrieve a signal.