WIRE CONNECTION DIAGRAM Wires met safety standards ans recommended lo connect the supply circuit CAUTION: Risk:of firs CANOPY INSTALLATION INSTRUCTIONS i Please read all instructions cars filly, Before you practiced to. natal, make sure that the power supply is turnips off and maims off until installation is complete Please: note that each: part has been assigned a letter Please proceed in an alphabetical ponder.
Assembly and Installation Steps Step Ripen the Step 3 Connect all white wires from the arm together, and connect all black wires from the ari together. Do not mix the black and white wires. There are two same mal wires, hey are thicker than the black and white wires. Connect black wires of the arms together with hone of the main ‘wire. Connect white wires of the arms |. together with the other main wire. The wires connection is finished. Step 7 install 5 G9 bulbs | {Mot included). \ Step Lock together : Ste
Assembly and Installation Steps Please note: The parts in this table are completely assembled for illustrative purpose. In the actual product that you receive, some parts arg assembled and attached together, Step 9 4. Lou lhe crossbar to lhe junction box of the calling by using 2 pes of B32 BOWWOWS i the albacores bag. 2. Connect ths wires. The photosensitive wire Is the ore which has witting on it The negative wire is the one which has no Wii ting. 3.
Please note: The parts in this table are completely assembled for illustrative purpose.