User Manual

Note: The Swivel Arm[1] can be adjusted to 0º , 55º and 210º orientations.

Power on: Flip up the Swivel Arm [1] from 0º to 55º to 210º

positions. The Bluetooth indicator[8] will glow (blue blink). This

indicates that the kit is ready (standby mode). Note: At first use, the

user has to pair SuperTooth II with his phone (refer to Section E

PAIRING TO A MOBILE PHONE.)

Power off: Flip down the Swivel Arm to 0º position. The Bluetooth

Indicator will become red then turns off after a second.

1. Plug the battery charger connector into the Charger Input [5] of

SuperTooth II.

2. Plug the other end of the charger into the electrical outlet.

Fixing of Clip

Fix the metal clip of SuperTooth II on the sun

visor.

Sun visor

Attach the magnetic back of SuperTooth II to

the fixed metal clip. The SuperTooth must be

placed wherein its microphone will be directed

to the mouth of the user.

The position of the SuperTooth II can vary

according to the position of the sun visor. The

Swivel Arm(1) can be adjusted to 0º, 55º

and 210 º orientations.

B. SWITCHING ON/OFF

C. CHARGING

D. INSTALLATION