User Manual

5
Answer a Call: When the phone receives a call, ring tone will be on the
SuperTooth II alone, or both on the SuperTooth II and on the phone
(depending on your phone model). Just short press Accept/End
Button[6] to answer the call.
Reject a Call: Short press Reject Button[2] to reject an incoming call.
Set the Volume: Set the volume using the Volume Control[10].
1. Turn it clockwise to increase the volume.
2. Turn it counterclockwise to decrease.
Note: If the volume set is too high, it can cause feedback (whistling
sound), echo, or background noise during calls on some cell phones.
Audio Transfer:
from Phone to SuperTooth II (SuperTooth II initiated):
Short press the Accept/ End Button[6].
from SuperTooth II to Phone (SuperTooth II initiated):
Long press Reject Button[2].
Accept / End
Button
(Short press)
Accept / End
Button
(Long press)
Reject Button
(Short press)
Reject Button
(Long press)
Connected / Standby Initiates voice dial
Redials last dialled
number
Disconnected /
Standby
Creates
reconnection
and initiates
voice dial
Creates
reconnection and
redials last dialled
number
Incoming call (ring
being generated)
Accepts the call Rejects the call Rejects the call
Removes the
ring audio from
SuperTooth II
Active call at
SuperTooth II
Ends the call
Redials last dialled
number
Ends the call
Transfers audio
to Phone
Active call at Phone
Transfers the
audioto
SuperTooth
Activates the
SuperTooth II and
creates another
redial of the last
dialled number
Outgoing call being
set-up
Ends the call Ends the call
Transfers audio
to Phone
H. Button Functions Matrix (Hands-free Profile)