Manual

Adjustment of Stitch Length

1. Larger the number, longer the stitch. Smaller the

number, shorter the stitch.

2. The stitch length can be adjusted from 1 to 4mm

(approx. 0.04" to 0.15")

3. The position "N" is for rolled and narrow hemmings.

Counter-

clockwise

Adjustment of Cutting Width

The proper cutting width differs with the type of fabric.

Check the seam each time, and adjust the cutting width

as follows:

1. Open the sewing table.

2. Turn the cutting width dial

- counter-clockwise to get the larger cutting width.

- clockwise to get the smaller cutting width.

Lamp cover

Replacing the Light Bulb

1. Disconnect the machine from the power supply.

Remove the lamp cover set screw, and remove the

lamp cover.

2. To Remove:

Turn to the left

To Attach :

Turn to the right

3. Attach the lamp cover, and tighten the lamp cover set

screw.

For your safety:

The machine is designed to use a 15 WATT MAXIMUM

LIGHT BULB.