Manual

Trouble Shooting
B_fore calling for service, check the information below.
Problem Cause Correction
-Reset needle
Thread Breaks
Needle Breaks
Machines Skips
Stitches
Fabric Puckers
Machine Runs
Heavily
Machine will
Not Sew
Loose Stitches
or Loops
Formed
1. Needle inserted
incorrectly
2. Used wrong needle
3. Needle is bent or
blunt
4. Thread tensions are
too tight
5: Wrong threading
1. Pulling fabric while
sewing
2. Needle inserted
incorrectly
1. Needle inserted
incorrectly
2. Needle is bent or
blunt
3. Used wrong needle
4. Wrong threading
1. Stitch length not
suitable for fabric
2, Thread tensions are
too tight
3. Seam width not
suitable ffor fabric
1. Dirt or lint in
stitching mechanism
1. Cord not plugged
into electrical
outlet
2, Light and power
switch not on
1, Tensions not adjusted
properly
-Use correct
needle
-Insert new
needle
-Loosen thread
tensions
-Rethread
-Do not pull
fabric
-Reset needle
-Reset needle
-Insert new
needle
-Use correct
needle
-Rethread
-Readjust stitch
length
-Loosen thread
tensions
-Readjust seam
width
-Clean the
machine
-Check plug
-Turn on the
switch
-Check thread
tensions
Reference
Page
-18
-18
-18
-15
-7-10
-18
-18
-18
-18
-7-13
-17
-15
-17
-19
-5
-5
-15
2O