Instruction Manual

11
 Connecting machine to power source / Conecta la máquina al fuente eléctrico
CAUTION:
Always make sure that the machine is unplugged from power
source and the main switch is on “Off” when the machine is not in
use and before inserting or removing parts.
ATENCION:
Desenchufe la máquina del toma corriente
cuando no la use.
Conecte la máquina a un fuente eléctrico según la ilustración.
Este dispositivo tiene un enchufe polarizado para lo que le instale el toma
apropiado.
Pedal de control
El pedal de control puede regular ;a velocidad de coser.
Alumbrado de trabajo
Conectar el interruptor principal “C” para le eléctrica y la luz. (Mirar figura 1)
This machine is equipped with a polarized plug which must be used with
an appropriate electrical outlet.
Connect the machine to a power source as illustrated below.
The power switch is located above the terminal box. Your machine will
not operate unless this switch is “On”.
Sewing light turns on automatically when the main switch is “On”.
To start the machine, press on the foot control.
The speed of the machine is regulated by the amount of pressure
exerted on the foot control.
(See fig. 1)
Fig. 1
IMPORTANT NOTICE
This appliance has a polarized plug (one
blade is wider than the other). To reduce
the risk of electric shock, this plug will fit in
a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a
qualified electrician. Do not modify the
plug in any way.