Instruction manual

34
Stitch selection/ Sélection des points
Triple straight stitch: (1)
Pattern selector on "A".
For hardwearing seams.
Turn the stitch length dial to "S1".
The machine sews two stitches forwards and one stitch backwards.
This gives triple reinforcement.
Triple zig-zag: (2)
Pattern selector on "B".
For hardwearing seams, hems and decorative seams.
Turn the stitch length dial to "S1".
Adjust the stitch width dial to between "3" and "5".
Triple zig-zag is suitable for firm fabrics like denim, corduroy, etc.
Triple point droit: (1)
Pour coutures à toute épreuve.
Placer sur position "S1" le bouton pour longueur de point.
La machine effectue deux points en avant et un point en arriére ce
qui permet d'obtenir une couture a triple renfort.
Point zigzag triple: (2)
Pour coutures à toute épreuve, ourlets et coutures décoratives.
Placer sur position "S1" le bouton pour longueur de point.
Placer le bouton pour largeur de point entre les positions "3" - "5".
Le triple point zigzag convient pour les tissus résistants tels que jeans,
velours côtelé, etc.
5
0
1
2
3
4
A
1
5
0
1
2
3
4
B
2
0
1
2
3
4
S
1
0
1
2
3
4
S
1