Instruction manual

Maintenance
50
12
3
b
c
d
e
a
Caution:
Always make sure that the machine is unplugged from power source
and the main switch is on "O" before inserting or removing any parts
and before cleaning.
Remove the stitch plate:
Cleaning the feed dog:
Cleaning and lubricating the hook:
Important:
Turn the handwheel until the needle is fully raised. Open the hinged
front cover and unscrew the needle plate screw with the screw driver. (1)
Remove the bobbin case and use the brush supplied to clean the
whole area. (2)
Remove the bobbin case. Snap the two hook retaining arms (a)
outwards. Remove the hook race cover (b) and the hook (c) and clean
with a soft cloth. Lubricate at the points (d) (1-2 drops) with sewing
machine oil. Turn the handwheel until the hook race (e) is in the left
position. Replace the hook (c). Replace the hook race cover and snap
back the two hook retaining arms. Insert he bobbin case and bobbin
and replace the stitch plate.
Fabric fluff and threads must be removed regularly. Your
machine should be serviced at regular intervals at one of our service
agencies.