OWNER’S MANUAL Model EP825 120V., 60 Hz, 12 Amps EURO-PRO Operating LLC 21 Lawrence Paquette Ind. Dr. Champlain, NY 12919 1 (866) 98SHARK (74275) www.sharkvac.
IMPORTANT SAFETY INSTRUCTIONS When using your SHARK Trailblazer, basic safety precautions should always be observed, including the following: WARNING: To reduce the risk of fire, electrical shock, or injury: 1. Do not leave vacuum cleaner unattended when it is plugged in. Unplug from outlet when not in use and before removing filters. 2. To reduce the risk of electric shock – do not use outdoors or on wet surfaces. 3. Do not allow children to use as a toy.
GETTING TO KNOW YOUR SHARK TRAILBLAZER Upright Vacuum TO ORDER REPLACEMENT BAGS, FILTERS OR BELTS for Model EP825 Call: 1-866-98SHARK (1-866-987-4275) Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time or visit our website: www.sharkvac.com 15 FOR TECHNICAL SUPPORT for Model EP825 Call: 1-800-798-7398 Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time Please Note: Both the Pre-Motor and Post Motor Filters are washable.
PROBLEM SOLVING OPERATING INSTRUCTIONS This appliance was inspected thoroughly and was in good operating condition when it was shipped from the factory. If a minor problem occurs, it usually can be solved quite easily when the cause is found. Therefore, this checklist is provided for your convenience. Assembling Your Vacuum Cleaner WARNING: Always remove the 1. 2. 3. 4. 5. power plug from the wall outlet before assembling or removing accessories. Carefully unpack all components, set aside packaging.
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS 5. Changing the Head Light Bulb: Warning: Always disconnect from power source when servicing or cleaning the unit. Failure to do so could result in electrical shock or personal injury from cleaner suddenly starting. • Turn unit “Off” and unplug from wall outlet. • Insert the edge of a flat edge screw driver into the locking tab on the headlight lens and pull the handle of the screw driver towards you.
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS Maintenance & Care For best cleaning results, the dust bag should be changed often. The use of powder carpet fresheners can decrease the effectiveness of the dust bag filtering system by clogging the bag and not allowing air to flow though properly. We recommend that hard objects, pins, broken glass, paper clips, etc. be picked up from the floor before vacuuming. Although, your vacuum will pick them up, they could do severe damage to the vacuum.
