Installation Guide

• Please read all instructions prior to installation.
• Installation of this xture must comply with local building codes.
• Installation of this xture must be done by a qualied electrician.
• Veuillez lire toutes les instructions avant l’installation.
• L’installation de ce luminaire doit être faite selon le code local
de construction.
• L’installation de ce luminaire doit être faite par un électricien qualié.
• Favor de leer toda las instrucciones antes de comenzar la instalacion.
• La instalacion de esta luminaria (este producto) debera de cumplir con los
codigos locales de construccion.
• La instalacion de esta luminaria (este producto) debera ser realizada por un
electricista calicado.
15330-017
INSTRUCTIONS
Thank You
You’ve just
purchased a
lighting product
designed and built
to provide you
with many years of
enjoyment.
Merci
Vous venez
d’acheter un
luminaire conçu pour
vous donner
des années de plaisir.
Gracias
Usted acaba de
adquirir un excelente
producto de alumbrado
disenado y construido
para proveerle muchos
años de satisfaccion.
15330/05/07
Tools Required • Outils Nécessaires • Herramientas Requeridas
INSTALLATION & CONNECTIONS
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
IMPORTANT: Use a qualied electrician for installation of this
lighting xture.
INSTALLATION INSTRUCTIONS
1. Turn off power at main fuse box.
2. Install mounting backplate (A) to junction box with 2 screws
supplied. Make sure black and white wires of junction box run
through the middle opening of the backplate.
3. Fasten open end of ground wire (bare copper or green wire), to
ground wire or ground screw of junction box or ground screw on
backplate.
4. Connect black wire of power supply to black wire of the xture
and the white wire of the power supply to the white wire of the
xture. NOTE: All wire connections should be made with wire
nuts or marettes (included) and pushed back into junction box.
5. Mount canopy of xture (B) over mounting plate (A) and secure
with 2 caps (C) supplied.
BULB AND DIFFUSER INSTALLATION
1. Insert 60W max. A19 bulbs (not included).
2. Install metal washer (D), diffuser (E), decorative disc (F) over bottom nipple
(G), and secure them by fastening nial (H) onto bottom nipple (G).
TURN ON POWER
ENJOY YOUR HAMPTON BAY™ LIGHTING PRODUCT