Instructions

00106141, Version 4.0

16/20

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an

expert after every four years in the course of an acceptance test.

The operator has to make sure that safety-relating and machine-technical installations are inspected by a

skilled person once a year.

The following points have to be considered during the inspection:

1) All screws used for installing the devices or parts of the device have to be tighly connected and must not

be corroded.

2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,

trussing).

3) Mechanically moved parts like axles, eyes and others must not show any traces of wearing (e.g. material

abrading or damages) and must not rotate with unbalances.

4) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or

sediments. Further instructions depending on the installation spot and usage have to be adhered by a

skilled installer and any safety problems have to be removed.

Maintenance and service operations are only to be carried out by authorized dealers.

Should you need any spare parts, please use genuine parts.

Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Mirrorball motor:

Power supply: 230 V AC, 50 Hz ~

Power consumption: 4 W

Maximum charge: 4 kg

Max. diameter of mirror ball: 40 cm (EUROLITE)

Rotation-speed: approx. 1.5 RPM

Diameter of base plate: 120 mm

Height: 85 mm

Weight: 0.4 kg

Mirrorball:

Diameter: 30 cm

Weight: 2 kg

Accessory:

EUROLITE MD-1515 Safety rotary motor No. 50301300

Double loop chain 2.5mm, WLL 20kg, 33cm No. 50301600

Double loop chain 2.5mm, WLL 20kg, 1m No. 50301605

Quick link w/screw cap 4mm f.mball -40cm No. 50301630

Flightcase for Mirror ball 30cm No. 31000429