User Guide
– 10 –
8. Z-Wave
Command Class Description Version Control (C)
Support (S)
Security *
Association Allows to associate with other Z-Wave devices. 2 S U, S0, S2
Association Group
Information
Allows to group associations. 1 S U, S0, S2
Battery Returns the current battery level of the device. 1 S U, S0, S2
Device Reset
Locally
Informs the Z-Wave Controller that the device was factory
reset.
1 S U, S0, S2
Firmware Update
Meta Data
Allows Over the Air Update of the device. 4 S U, S0, S2
Manufacturer
Specific
Provides information about manufacturer and product. 2 S U, S0, S2
Notification Informs the controller about system events. 8 S U, S0, S2
Power Level Used to alter the rf-power (required by Z-Wave). 1 S U, S0, S2
Security Allows encrypted Z-Wave communication. 1 S U
Security 2 Allows encrypted Z-Wave communication. 1 S U
Parameter Wert
Basic Device Attribute 0x07 – GENERIC_TYPE_SENSOR_NOTIFICATION
Specific Device Attribute 0x01 – SPECIFIC_TYPE_NOTIFICATION_SENSOR
Role Type 0x06 – ROLE_TYPE_SLAVE_SLEEPING_REPORTING
Icon Type 0x0C06 – ICON_TYPE_SPECIFIC_SENSOR_NOTIFICATION_ACCESS_CONTROL
User Icon Type 0x0C06 – ICON_TYPE_SPECIFIC_SENSOR_NOTIFICATION_ACCESS_CONTROL
Manufacturer Identifier 0x0148 – MFG_ID_EUROTRONICS
Product Type Identifier 0x0010
Product Identifier 0x0002
Firmware identifier 0x1002
7. General Conguration