User Guide

– 6 –
5.1 Button
5. Operating the Device
Button State Meaning
Network-
Button
Press the button
three times in quick
succession.
Joing or leave a Z-Wave network.
Network-
Button
Keep button pressed
for 10 seconds.
Reset door/window contact to factory settings.
5.2 LEDs
Colour State Meaning
Green blinking Network operation (join or leave) is executed.
Green lights up for 5
seconds
A task was completed successfully.
Red lights up for 5
seconds
A task has failed or has not ended successfully.
2 x Red,
3 x Green
light up one after the
other
Factory reset was successful. Factory settings have been restored.
3 x Red blinking Battery is insufficient. Replace the battery.
LED-Anzeige
Note: To use the low push button in the housing of the Door/
Window Contact, use a paper clip or a similar thin item.