Specification

67
All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001
certified and approved. The fasteners comply with ASTM C1002, as referenced in ICCES report ER-5280
are approved for use in structures governed by the International Building Code 2006, 2009, 2012,
International Residential Building Code 2006, 2009, and 2012.
PRODUCT DIMENSIONS (MILLIMETERS)
Gauge B Head Recess W Gauging d Shank d1 Minor d2 Major TPI
Dia Depth Width Dia Dia Dia
#6 8.00 0.50 #2 2.68 2.27 3.45 15
8.50 0.80 2.72 2.42 3.58
#7 8.00 0.50 #2 2.93 2.40 3.75 15
8.50 0.80 2.97 2.55 3.90
#8 8.00 0.50 #2 3.18 2.80 4.08 15
8.50 0.80 3.22 3.00 4.20
#10 8.50 0.50 #2 3.78 3.20 4.75 12
8.90 0.80 3.82 3.40 4.95
PULL-OUT TEST DATA
Screw Gauge Metal Gauge Tension (lbs.) Shear (lbs.)
#6 20 237 557
25 139 278
#7 20 222 817
25 100 245
#8 20 342 785
25 145 325
#10 20 392 418
25 171 358
**GRABBER
®
fasteners are not categorized as structural bolts. The figures listed above
are ultimate average values achieved under independent laboratory conditions, and apply
to GRABBER Line fasteners only. An appropriate safety factor must be determined by a
qualified professional for design purposes.
Product #212
Bugle Head STREAKER
®
(3 OF 3)
Light Gauge Metal (20-25)
SHEET STEEL GAUGES
Gauge No. Decimal Equivalent Millimeter Equivalent
20 0.0396” 1 mm
25 0.0188” .6 mm