Installation Guide

3
Pre-installation
CHOOSE YOUR HARDWARE
PLANNING INSTALLATION
TOOLS REQUIRED
HARDWARE PACKAGE CONTENTS
NOTE: Hardware not shown to
actual size.
AA
BB
CC
DD
Panhead Screw (#12 x 2 in.)
Anchor (1/4 in.)
Bolt (3 in.)
Toggle (3/16 in.)
33
33
33
33
Part QuantityDescription
1. Measure the closet width and plan the layout. See the “Plan Your Closet Layout” section for illustration examples.
2. Select the correct hardware for assembly. See "choose your hardware" section below.
3. Use stud nder to locate the studs and mark. It is recommended to mount hang tracks onto studs.
4. For creating larger layouts that include multiple hang tracks, install this kit hang track rst then install additional hang track
extensions ensuring additional hang track is level and in line with previously mounted hang track(s).
Screwdriver Drill Pencil Tape Measure Level HacksawStud Finder
AA BB
CC DD
HOMEDEPOT.COM
Please contact 1-800-305-1726 for further assistance.
Secure to the wall with panhead
screws (AA) at stud locations.
Drill 1/4 in. holes, insert wall
anchors (BB) and secure to the
wall with panhead screws (AA).
WARNING: This product can expose you to chemicals, including lead, which is known to the
State of California to cause cancer and birth defects or other reproductive harm. For more
information go to www.P65Wamings.ca.gov
STUDS
CONCRETE
AA
BB AA