User Manual

EHD930 eZ.HD Vandal Dome Camera
10
b. Configure the camera settings using the OSD Menu Joystick, connect one end of the
Test Lead to the Test-Out connector on the camera module and the other end to the
portable monitor.
Note: The function button is not only for direction control, also for switching Video format
and Video output. Please follow the detailed instruction as below:
 Push the joystick "DOWN" button key over 5 seconds to switch video format from
PAL to NTSC.
 Push the joystick "LEFT" button key over 5 seconds to switch video output from
720p to 960H (720p is the default).
 Push the joystick "RIGHT" button key over 5s to switch video output from 960H to
720p.
8. Adjust the Zoom / Focus using the Zoom / Focus screws. Tighten the Zoom / Focus screws
using the supplied Screwdriver.
 Push the Joystick up / down to select
among menu items.
 Push the Joystick left / right to adjust
the level of the selected item.
 Press the Joystick to enter the submenu
or exit the OSD Setup Menu.