User Manual

EHD930 eZ.HD Vandal Dome Camera
7
3. Installation
3.1 Installation and Adjustment
1. To remove the Cover Cap, unscrew the three Set Screws using the supplied Hexagon
Wrench.
2. For Ceiling Mount / Wall Mount users: Stick the Template Plate on the position where you
want to attach the camera, drill the four holes on the Template Plate for screwing the
Adapter Plate with the supplied Screws and Anchors.
Drill either one of the circles in The Template Plate only if you want to wire the cables
through the wall / ceiling. Insert the supplied four Anchors into the holes.