Assembly Instructions Caution: You should read this carefully before you proceed Leisure Chair Part List Label A Picture Description QTY Seat 1 Page 1 OF 6
B Frame 1 Description QTY ① Bolt(M6x25mm) 5 ② Spring Washer 5 ③ Washer 5 ④ Allen Key 1 Hardware Label Picture Assembly Preparation Before Beginning Assembly: Page 2 OF 6
Assembly Steps Overview Seat(A) Frame(B) FRONT FACING Back Legs Front Legs This Leisure Chair has multiple parts and may require up to 20 minutes to assemble. To give you an overview of the Leisure Chair parts, the above picture is provided to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 X5 X5 X5 Open the carton and place all the parts on a clean, non-marring surface. Step 2 Back Legs Front Legs Place the Seat(A) facedown, on a clean, non-marring surface. Attach the Frame(B) to the Seat(A) with the Allen Key(④), using Bolts(①), Spring Washers(②) and Washers(③) as shown above. Tighten all Bolts fully in a sequential manner. DO NOT fully tighten a Bolt in one go and then move on to the next.
Step 3 Turn the Leisure chair rightside up. It is now ready for use. This Leisure Chair can only be used on a flat, level surface.
Page 6 OF 6