Specification Sheet

ManualsBrandsEveryDrop ManualsRefrigerator Water FiltersEDR3RXD1

Table Of Contents

W11392627C

Water Filtration System

Model EDR3RXD1B/P1WB2 Capacity 200 Gallons (757 Liters) with PID; 100 Gallons (378 Liters) without PID

Replacement Filter EDR3RXD1, EDR3RXD1B, and KAD3RXD1

System tested and certified by NSF International against NSF/

ANSI Standard 42, 53, 401 and CSA B483.1 for the reduction of

contaminants specified on the Performance Data Sheet.

This system has been tested according to NSF/ANSI Standards 42, 53, 401 and CSA B483.1 for the reduction of

the substances listed below. The concentration of the indicated substances in water entering the system was

reduced to a concentration less than or equal to the permissible limit for water leaving the system, as

specified in NSF/ANSI Standards 42, 53, 401 and CSA B483.1.

Substance Reduction

Aesthetic Effects

Influent Challenge

Concentration

Maximum Permissible

Product Water

Concentration

Average % Reduction

Chlorine Taste/Odor 2.0 mg/L ± 10%

50% reduction

>97.5%

Particulate Class I*

At least 10,000 particles/

85% reduction

99.2%

Contaminant Reduction Influent Challenge

Concentration

Maximum Permissible

Product Water

Concentration

Average % Reduction

Lead: @ pH 6.5 / @ pH

8.5

0.150 mg/L ± 10% 0.010 mg/L >99.3% / >99.3%

Mercury: @ pH 6.5 / @

pH 8.5

0.006 mg/L ± 10% 0.002 mg/L >96.4% / 90.8%

Asbestos

to 10

fibers/L††

99% 99%

Cysts†

50,000/L min.

99.95% >99.99%

Turbidity

11 NTU ± 10% 0.5 NTU >99.1%

Alachlor

0.040 mg/L ± 10% 0.002 mg/L

97.6%

Atrazine

0.009 mg/L ± 10% 0.003 mg/L

94.50%

Benzene

0.015 mg/L ± 10% 0.005 mg/L

96.6%

Carbofuran

0.080 mg/L ± 10% 0.040 mg/L

91.1%

Chlorobenzene

2.000 mg/L ± 10% 0.100 mg/L

99%

Endrin

0.006 mg/L ± 10% 0.002 mg/L

96.6%

Ethylbenzene

2.100 mg/L ± 10% 0.700 mg/L

99.9%

Lindane

0.002 mg/L ± 10% 0.0002 mg/L

99%

MTBE

0.015 mg/L ± 10% 0.005 mg/L

90.6%

PERFORMANCE DATA SHEET

10-May-2021 11:18:48 EDT | RELEASED

In some European factories the letter "W" of the part code mentioned herein will be automatically

replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")

Summary of content (9 pages)

PAGE 1
PERFORMANCE DATA SHEET Water Filtration System Model EDR3RXD1B/P1WB2 Capacity 200 Gallons (757 Liters) with PID; 100 Gallons (378 Liters) without PID Replacement Filter EDR3RXD1, EDR3RXD1B, and KAD3RXD1 System tested and certified by NSF International against NSF/ ANSI Standard 42, 53, 401 and CSA B483.1 for the reduction of contaminants specified on the Performance Data Sheet. This system has been tested according to NSF/ANSI Standards 42, 53, 401 and CSA B483.
PAGE 2
O-Dichlorobenzene 1.800 mg/L ± 10% 0.600 mg/L 99.9% Tetrachloroethylene 0.015 mg/L ± 10% 0.005 mg/L 96.4% Toxaphene 0.015 mg/L ± 10% 0.003 mg/L >93.7% TTHM 0.045 mg/L ± 10% 0.080 mg/L 99.5% Styrene 2.000 mg/L ± 10% 0.100 mg/L 99.9% VOC 0.300 mg/L ± 10% 0.015 mg/L 99.7% Atenolol 200 ± 20% 30 ng/L 95.7% Trimethoprim 140 ng/L ± 20% 20 ng/L 96.1% Linuron 140 ng/L ± 20% 20 ng/L 96.3% Estrone 140 ng/L ± 20% 20 ng/L 90.6% Nonylphenol 1400 ng/L ± 20% 200 ng/L 93.
PAGE 3
The compounds certified under NSF 401 have been deemed as “emerging compounds/incidental contaminants.” Emerging compounds/incidental contaminants are those compounds that have been detected in drinking water supplies at trace levels. While occurring at only trace levels, these compounds can affect the public acceptance/perception of drinking water quality. � For installation, operation, and maintenance instructions please refer to the Owners Manual.
PAGE 4
FICHE DE DONNÉES DE PERFORMANCE Système de filtration de l’eau Modèle EDR3RXD1B/P1WB2 Capacité de service nominale = 200 gal. (757 L) avec indicateur PID, 100 gal. (378 L) sans indicateur PID Filtres de remplacement EDR3RXD1, EDR3RXD1B et KAD3RXD1 Système testé et homologué par NSF International en vertu des normes NSF/ANSI 42, 53 et 401, ainsi que CSA B483.1 pour la réduction de contaminants spécifiés sur la fiche de données de performance.
PAGE 5
O-dichlorobenzène 1,800 mg/L ± 10 % 0,600 mg/L 99,9 % Tétrachloroéthène 0,015 mg/L ± 10 % 0,005 mg/L 96,4 % Toxaphène 0,015 mg/L ± 10 % 0,003 mg/L > 93,7 % TTHM 0,045 mg/L ± 10 % 0,080 mg/L 99,5 % Styrène 2,000 mg/L ± 10 % 0,100 mg/L 99,9 % COV 0,300 mg/L ± 10 % 0,015 mg/L 99,7 % Aténolol 200 ± 20 % 30 ng/L 95,7 % Triméthoprime 140 ng/L ± 20 % 20 ng/L 96,1 % Linuron 140 ng/L ± 20 % 20 ng/L 96,3 % Estrone 140 ng/L ± 20 % 20 ng/L 90,6 % Nonylphénol 1400 ng/L ± 20 % 20
PAGE 6
Les composés certifiés en vertu de la norme NSF 401 sont considérés comme appartenant à la catégorie des « composés émergents/contaminants secondaires ». Les composés émergents/contaminants secondaires sont des composés qui ont été détectés à de faibles concentrations dans des sources d’approvisionnement en eau potable. Même s’ils n’apparaissent qu’à de faibles concentrations, ces composés peuvent influencer la perception et le niveau d’acceptation de la qualité de l’eau de consommation par le public.
PAGE 7
HOJA DE DATOS DE RENDIMIENTO Sistema de filtrado de agua Modelo EDR3RXD1B/P1WB2 Capacidad 200 galones (757 litros) con PID; 100 galones (378 litros) sin PID Filtro de reemplazo EDR3RXD1, EDR3RXD1B, y KAD3RXD1 Sistema probado y certificado por NSF International, según las normas NSF/ANSI 42, 53 y 401 y CSA B483.1 para la reducción de los contaminantes especificados en la Hoja de datos de rendimiento. Este sistema ha sido probado según las normas NSF/ANSI 42, 53, 401 y CSA B483.
PAGE 8
Tetracloroetileno 0,015 mg/l ± 10 % 0,005 mg/l 96,4 % Toxafeno 0,015 mg/l ± 10 % 0,003 mg/l >93,7 % TTHM (Total de trihalometanos) 0,045 mg/l ± 10 % 0,080 mg/l 99,5 % Estireno 2,000 mg/l ± 10 % 0,100 mg/l 99,9 % VOC (compuestos orgánicos volátiles) 0,300 mg/l ± 10 % 0,015 mg/l 99,7 % Atenolol 200 ± 20 % 30 ng/l 95,7 % Trimetoprima 140 ng/l ± 20 % 20 ng/l 96,1 % Linurón 140 ng/l ± 20 % 20 ng/l 96,3 % Estrona 140 ng/l ± 20 % 20 ng/l 90,6 % Nonilfenol 1400 ng/l ± 20 % 200
PAGE 9
Los compuestos certificados según NSF 401 se han considerado "compuestos emergentes o contaminantes incidentales". Los compuestos emergentes o contaminantes incidentales son aquellos compuestos que se han detectado en suministros de agua potable en niveles de traza. Aunque solo se presentan en niveles de traza, estos compuestos pueden afectar la aceptación o percepción pública de la calidad del agua potable.