Instructions / Assembly

11
Evo, Inc., 20560 SW 115th Ave., Tualatin, OR 97062 USA
Phone [phone] | Fax [phone] | www.evoamerica.com | [e-mail]
1. Position bottom of right leg with label marked RIGHT to
lower rack and slide over axle.
2. Visually align screw holes and place phillips screw (10)
into fi rst mounting hole.
3. Secure to lower rack by fi rst installing Nyloc Hex Nut (11).
Securely tighten screws by holding screwdriver
steady against screw head and using wrench to
tighten nyloc hex nut.
4. Repeat for second mounting hole.
5. Repeat for left leg which is marked with label LEFT.
6. Position bottom of rear leg label marked REAR to lower
rack.
7. Visually align screw holes and place phillips screw (10) in
mounting hole.
8. Secure by installing Nyloc Hex Nut (11).
9. Repeat for second mounting hole.
Assembling The Grill
Legs to Lower Rack
Wheels to Lower Rack
1. Slide left wheel spacer marked LEFT ( on fl at-side of
spacer ) over left axle and position cutout to match angle
of leg.
2. Slide white nylon spanner bushing over axle and against
wheel spacer.
3. Slide wheel over spanner with three hub plate screw
holes facing outward.
4. Install washer (20) and nyloc hex nut (21). Tighten nut
using socket and L wrench provided in tool kit.
5. Place hub plate over outside of wheel and align with
mounting holes in wheel.
6. Install three stainless screws (22) through hub plate and
into wheel.
7. Repeat for right wheel installation using spacer marked
RIGHT.
Some parts may contain sharp edges.
Wear protective gloves as necessary.
Phillips Screw (10)
Nyloc Hex Nut
(11)
Phillips Screw (10)
Nyloc Hex Nut
(11)
Screws (22) 3x
Left Wheel Spacer
(marked on fl at end)
Left
Front
Wheel Spanner
(slide over axel)
Wheel
Flat Washer
(20)
Nyloc Nut (21)
(nylon faces outward)
Hub Plate
(polished side faces outward)