Owner & Installation Manual

INSTALLATION INSTRUCTIONS
A f f i n i t y 3 0 G p
Evo, Inc., 20560 SW 115th Ave., Tualatin, OR 97062 USA
Phone [phone] | Fax [phone] | www.evoamerica.com | [e-mail]
12
COUNTER TOP INSTALLATION (4 of 4)
CORRECT ALIGNMENT OF DRIP PAN
AND CHASSIS TO COUNTER TOP
INCORRECT ALIGNMENT OF DRIP PAN
AND CHASSIS TO COUNTER TOP
BLACK O-RING
UNDER DRIP
PAN BEAD
Make sure cabinetry box is 1-1/2” below counter top surface and mounting brackets are
positioned correctly so drip pan and chassis are aligned to counter top. (see diagrams above).
A black o-ring is recessed in the top bead and designed to create a seal against the counter
top.
POSSIBLE REASONS FOR INCORRECT ALIGNMENT:
1. TOP OF CABINETRY BOX IS LESS THAN 1-3/16” (3CM) FROM COUNTER TOP.
2. CHASSIS MOUNTING BRACKETS ARE TOO HIGH.